HAMMOND, 1422D12, N12 DOUBLE DOOR, WALL MOUNT ENCLOSURE WITH PANEL – 60″ X 60″ X 12″ – STEEL/GRAY

HAMMOND, 1422D12, N12 DOUBLE DOOR, WALL MOUNT ENCLOSURE WITH PANEL – 60″ X 60″ X 12″ – STEEL/GRAY

Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water.

Standards

• UL 508A Type 12
• CSA Type 12
• Complies with
  • NEMA Type 12
  • IEC 60529, IP54

Construction

• Enclosures are formed steel – 14 gauge (54″ high), 12 gauge (60″ high), or combination 10/12 gauge (72″ high).
• Smooth, continuously welded seams without knockouts, cutouts or holes.
• Body stiffeners are provided in enclosures for extra rigidity.
• Heavy duty lifting eyebolts are provided with reinforced support angles.
• 12″ floor stands are welded to the enclosure. (w/ feet Part No.).
• Welded brackets provide for enclosure mounting (w/o feet Part No.).
• Gasketed overlapping doors eliminate the need for a center post.
• Continuously hinged doors may be removed by pulling the hinge pin.
• Doors are secured with a three point latch and operated with a key locking, padlockable handle.
• Latch rods are equipped with rollers for easier door closing.
• Oil resistant gaskets are permanently secured.
• A removable 10 gauge inner panel is included in enclosures 60″ and larger. Smaller sizes include a 12 gauge inner panel.
• Provision for light kit mounting.
• Panel supports are provided in enclosures 60″ and larger for easy panel installation.
• Collar studs are provided for mounting inner panels.
• A grounding stud is provided in the enclosure for each door and a bonding stud is pro­vided on the door.
• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
• Removable inner panel is finished in white powder coating.